UltraBARX Firmware – CoreBAR & Module Updates | Sanytron UltraBARX Firmware – LineOS v1.0.9 & Module Updates | Sanytron
Skip to Content
Firmware Latest: LineOS v1.0.9 OTA Ready

UltraBARX Firmware

Keep your CoreBAR and modules up to date.

UltraBARX Firmware Update

Download the latest LineOS™ and CoreBridge system applications for CoreBAR, plus module firmware updates for SenseCube, VivoCube, DotKey, and KnobKey.

Latest release bundle: v1.0.1.0 (October 21, 2026) · View full release notes →

Current Versions

Latest firmware versions for each component in your UltraBARX system.

Core Interface

CoreBAR

LineOS™ v1.0.9
LineOS v1.0.9 · CoreBridge v1.0.4

System firmware for CoreBAR 7-inch touchscreen host. v1.0.9 introduces the online application marketplace, automation configuration, boot card support, plus fixes for time display and Wi-Fi connectivity.

✓ OTA Update · October 21, 2026
📡

SenseCube

V2
Updated v1.0.1.0

Firmware for mmWave radar, light sensor, temperature, and humidity sensing module. V2 updates the tap gesture and adds temperature calibration.

Radar Light Sensor Temp/Humidity
Download
🖥️

VivoCube

V2 (20260728)
Stable

Firmware for 2-inch AMOLED touchscreen display module with gesture control.

AMOLED Touch Gesture Control
Download
⌨️

DotKey

V2
Stable

Firmware for mechanical key module with RGB backlighting and macro support.

Cherry MX RGB Macros
Download
🎛️

KnobKey

V2
Stable

Firmware for metal rotary encoder module with push-button and tactile feedback.

Rotary Push Programmable
Download

Update Guide

Two update paths — one for CoreBAR, one for modules.

CoreBAR

OTA Updates

LineOS and CoreBridge updates are delivered over the air. Open Settings → About on your CoreBAR to check for updates. Beta testers can use the gray-release procedure (long-press LineOS, enter codes 8888 and 9999).

Modules

Manual OTA via UltraWorkspace

Module firmware updates (SenseCube, VivoCube, DotKey, KnobKey) are performed manually through UltraWorkspace. Download the .bin file, then: right-click the module → Detail → OTA tab → Start OTA.

Keep your system running.

Stay up to date with the latest features and improvements.