Factory Reset Last Resort Start Fresh

Factory Reset

Restore your UltraBARX to its original state

If you're experiencing persistent issues that can't be resolved through other troubleshooting steps, a factory reset can restore your UltraBARX to its original state. This is a last resort — please back up any custom configurations first.

Back to Troubleshooting

Reset CoreBAR Reset Individual Modules After Reset

Reset CoreBAR

Factory reset the main UltraBARX unit.

🔄

Factory Reset CoreBAR

Solved

Restore CoreBAR to factory default settings. This will erase all profiles, configurations, and customizations.

Step-by-Step

⚠️ Important: Back up your configurations before proceeding
Step 1: On CoreBAR, swipe down from the top of the screen to open the Quick Control panel
Step 2: Tap the Settings icon (gear)
Step 3: Navigate to System → Reset Options
Step 4: Tap Factory Reset or Erase All Data
Step 5: Confirm your choice when prompted
Step 6: Wait for CoreBAR to reboot and start the initial setup wizard

Warning: This action cannot be undone. All profiles, widget configurations, module bindings, and custom settings will be permanently deleted.

Alternative: You can also perform a factory reset from Ultra Workspace by going to Settings → CoreBAR → Reset.

Reset Individual Modules

Reset a specific module to its default state.

🧩

Reset Individual Modules

Solved

Reset a specific module (DotKey, KnobKey, VivoCube, or SenseCube) to its factory default settings.

Step-by-Step

Step 1: In Ultra Workspace, navigate to the Modules section
Step 2: Click on the module you want to reset
Step 3: In the module details panel, look for "Reset Module" or "Restore Defaults"
Step 4: Click the reset button and confirm when prompted
Step 5: The module will reset to its default configuration
Step 6: You may need to reattach the module or refresh CoreBAR

Tip: For VivoCube, you can also reset it by long-pressing the VivoCube screen for 5 seconds and selecting "Reset" from the system menu.

After Reset

What to do after a factory reset.

🚀

What to Do After Reset

Solved

After a factory reset, your UltraBARX will be in its original state. Here's how to get back up and running.

Next Steps

Step 1: Complete the initial setup wizard (select language, connect Wi-Fi)
Step 2: Update firmware if needed (Settings → About → Firmware Update)
Step 3: Reconnect your modules (attach them magnetically to CoreBAR)
Step 4: Open Ultra Workspace and create a new project
Step 5: Connect Ultra Workspace to CoreBAR (search and add device)
Step 6: Restore your profiles from backup (if available)
Step 7: If no backup is available, create new profiles from scratch
Step 8: Deploy your configuration to CoreBAR

Note: If you backed up your configuration before resetting, you can restore it in Ultra Workspace by opening the saved project file (.umpf). If you didn't back up, you'll need to recreate your profiles manually.

✅ Success: After completing these steps, your UltraBARX should be back to its pre-reset state (or a fresh start).